Smart Stick - Rugged, Heavy Duty Soil Probe
The Smart Stick is a heavy duty soil probe which resists bending and is designed for easy penetration and withdrawal.  The yellow handles are designed for comfort and high visibility.

FEATURES:
Grips: Bright color, easy to see, Comfortable, smooth, Durable vinyl softens impact
Handle: Sturdy 1" x 11" solid steel, Provides additional weight and support for easier penetration, Large enough to grip with both hands even while wearing gloves
Shaft: High quality alloy steel resists bending and bowing, Handle and shaft threaded for secure connection and ease of replacement
Tip: Replaceable, Special alloy steel, Heat treated for longer life, Tapered edges make penetration and withdrawal easier

Smart Stick is available in 36", 42", 48", 54", 60", 66", and 72" lengths

WARNING!
The Smart Stick DOES NOT provide protection from electrical shocks.  The vinyl grips are for operator comfort only.  For insulated capabilities, please refer to the Mighty Probe.

Striking Head Probe
Striking Head Probe designed to break through tightly packed or frozen soils. Improved 2" wide hex head is integrated with an 11" wide handle.  The hex head is designed for striking with a maul.  Adding 3 lbs. to the overall probe weight, the hex head has been lengthened and counter bored to ensure durability and longevity, especially between the head and rod transition point.

Two versions are now available: Standard: 3/8" Shaft & Heavy Duty: 1/2" Shaft. The Standard 3/8" Shaft is available in 36", 42", 48", 54", 60", 66", and 72" lengths. The Heavy Duty 1/2" Shaft is available 36", 42", 48", 54" and 60" lengths.

FEATURES:
The Striking Head includes all of the same features as the Smart Stick plus the following:

• A 3 pound hexagonal striking head to allow striking with a maul
• Extra Heavy Duty design for added pounding power
• Special alloy steel heat treated for durability
• Striking head and shaft threaded for secure connection

The Mighty Probe provides increased protection against electrical shock resulting from incidental contact with energized lines.  As with all quality tools, it should be used correctly and under proper conditions.

The Mighty Probe has been tested to 50,000 volts by an independent testing laboratory following ASTM F711-89 testing procedures.  Additionally, it has been tested by the commercial laboratory services of a major utility company. (Both dry and 48hr. water soak to 45,000 volts.)

FEATURES:
Grips: Bright color, easy to see, Comfortable, smooth, Durable vinyl softens impact
Handle: Sturdy 1" x 11" solid steel, Provides additional weight and support for easier penetration, Large enough to grip with both hands even while wearing gloves
Isolator: High strength reinforced composite, Molded to the handle for a secure connection, Special alloy threaded insert
Shaft: High quality alloy steel resists bending and bowing, Same shaft as Smart Stick soil probe, Handle and shaft threaded for secure connection and ease of replacement, Threaded for tip or coupler and extension
Tip: Replaceable, Special alloy steel, Heat treated for longer life, Tapered edges make penetration and withdrawal easier

The Mighty Probe is available in 36", 42", 48", 54", 60", 66", 72" and 78" lengths. IMPORTANT: The Mighty Probe lengths includes the 6" current isolator. Therefore the 48" Mighty Probe allows you to probe 42" deep (48" overall - 6" isolator = 42" rod).

Mighty Probe Lite - Insulated Metal Soil Probe
Mighty Probe Lite is designed for sand, loose, or wet soil. The Mighty Probe Lite is a light duty insulated soil probe.  The Mighty Probe Lite retains the same electrical protection of the Mighty Probe while featuring a thin lightweight stainless steel shaft which won't rust and resists bends.  For heavy duty use, purchase a Mighty Probe.

The Mighty Probe Lite provides increased protection against electrical shock resulting from incidental contact with energized lines.  As with all quality tools, it should be used correctly and under proper conditions.

The Mighty Probe Lite has been tested to 50,000 volts by an independent testing laboratory following ASTM F711-89 testing procedures.  Additionally, it has been tested by the commercial laboratory services of a major utility company. (Both dry and 48hr. water soak to 45,000 volts.)

FEATURES:
Grips: Bright color, easy to see, Comfortable, smooth, Durable vinyl softens impact
Handle: Sturdy 1" x 11" steel tube for light weight, Light enough for one hand use, Large enough to grip with both hands even while wearing gloves
Isolator: High strength reinforced composite,Molded to the handle for a secure connection, Special alloy threaded insert
Shaft: High quality stainless steel shaft which is flexible and resists bending, Small diameter for easy penetration in sand, loose or wet soils, Handle and shaft threaded for secure connection and ease of replacement
Tip: Due to small diameter of shaft, a tip is not required

The Mighty Probe Lite is available in 42" and 48" Lengths. IMPORTANT: The following lengths include a 6" high-strength isolator. Therefore the 48" Mighty ProbeÔ Lite allows you to probe 42" deep (48" overall - 6" isolator = 42" rod).

Slide Hammer Adapter
A new slide adapter is available for the Mighty Probe and Smart Stick. This coverts your standard probe into a mini slide hammer. 

Threaded between the shaft and handle, it has a 6" stroke and adds 9" to the overall length.

Top of Page

Slide Hammer Probe
The integrated slide hammer makes driving this probe into the hardest ground easy.  More effective than striking a probe with a maul. The sliding head has been specifically designed to minimize the number of pinch points, reducing the risk of injuries. Comfortable 16" handles are made from 1" diameter steel tubing allowing ample room for the hands.  The dual handles (spread 7 1/2" apart) provide greater control and improved ergonomics. All internal pieces of the head assembly are manufactured from high strength impact resistant tool steel.  This steel is designed for minimal distortion, ensuring a long lasting probe. The tips are heat treated alloy steel and create a small clearance hole for the 1/2" shafts. The Hammer is powder coated a bright blue for high visibility and a long lasting finish.

The Hammer Probe is available in 36", 42", 48", 54", and 60".

FEATURES:
Highlights: 18" stroke, 28" overall length, 13 lbs. total weight, 16" long handles on each side for easy lifting, control, and safety, High strength impact resistant tool steel for a long life, Specially designed head minimizes pinch points.
Shaft: 1/2" high quality steel alloy resists bending and bowing, Head and shaft are threaded to ensure a secure connection and ease of replacement.
Tip: Special alloy steel, Heat treated for longer life, Tapered edges make penetration and withdrawal easier, Provides clearance for the 1/2" steel shaft, Threaded for easy replacement.

WARNING!
The Slide Hammer Probe DOES NOT provide protection from electrical shocks.  For insulated capabilities, please refer to the Mighty Probe.

Water Probe
The high quality Water Probe is constructed to allow water to flow through the shaft. Let the water do the work for you; there's no need to push hard.  Penetrates hard, dry soil.  Works well for getting through the frost layer.  Can be used to clean out meter boxes. Water Probe is available in 48", 60", and 72" lengths.

FEATURES:
Grips: Bright color, easy to see, Insulates against cold, Comfortable, smooth
Handle: 1" steel tubing, 3/4" brass standard hose connector
Valve: Brass, 1/2" full port, Conveniently located control, Threaded for easy replacement
Shaft: High quality thick-wall steel tubing resists bending, Handle and shaft threaded for secure connection and ease of replacement
Tip: Improved design for less clogging, Beveled for better penetration, Hardened steel

Handy Hook II
Multi-purpose back-saving tool. The dual pronged Handy Hook II is a multi-purpose lifting tool.   The dual prongs help provide stability while lifting riser covers or septic tank lids. The steel handle and shaft are threaded and welded to ensure a secure connection and alignment. The Handy Hook II is available in 30" and 45" Lengths.

FEATURES:
Grips: Bright color, easy to see, Comfortable, smooth, Durable vinyl softens impact
Handle: Sturdy 1"x11" solid steel, Big enough to grip with both hands even when wearing gloves
Shaft: 1/2" round alloy steel, Resists permanent bends
Head: Dual prongs welded to shaft, Designed to add stability

The Handy Hook
The Handy Hook is a multi-purpose back-saving tool designed for those hard to reach lifting jobs such as: Lifting riser covers, Opening steel grates, Lifting septic tank lids, Pulling skids in trucks, Moving machinery, Moving portable toilets, and more. The Standard Handy Hook is available in lengths of 30" and 45" and a Stainless Steel 16" length.

FEATURES:
Grips: Bright color, easy to see, Comfortable, smooth, Durable vinyl softens impact
Handle: Sturdy 1"x11" solid steel (not the stainless steel model), Big enough to grip with both hands even when wearing gloves

The Top Popper
The ultimate in high quality manhole cover openers. The Top Popper is designed for superior strength.  The rigid 5/8" hex alloy steel offers versatility in handling tasks safely. The Top Popper is available in 2 styles: In-Line D Handle and Rotated D Handle. Both styles are available in 24", 30", and 36" lengths.

FEATURES:
Material: 5/8" Hex alloy steel, Heat treated for durability, Bright blue color, easy to see
Handle: Oversized "D" handle for gloved hand, available in the standard In-line handle, or the more popular Rotated handle
Head: Forged tip for inserting in small openings, Special rocker head provides additional leverage for "popping" open even the most difficult covers

The Manhole Hook
The original high quality tool for opening manhole covers. The Manhole Hook is designed for superior strength.  The in-line "D" handle and rigid shank offers versatility in handling tasks safely.

FEATURES:
Material: 5/8" Hex alloy steel, Heat treated for durability, Resists bending and flexing, Bright color, easy to see
Handle: Oversized "D" handle for gloved hand
Head: Original style beveled hook a standard in the industry

The PFO Hook
The Double-Handle PFO Hook ( Pump and Filter Hook) has been designed for raising and lowering pumps, filters, and other things into and out of hard to reach places such as lift statioins.  This hook also has the ability to hook and raise pump floats thereby turning on the pumps and evacuating the area. Two integrated handles make this hook easy to manage when reaching deep down into a hole.  The middle handle allows you to maintain good lifting leverage. The 72" PFO Hook is available in three different ends.  The pump hook end is designed to hold pumps securely while lifting.  The single and double hook ends are designed to reach between the filter baffles allowing the filters to be extracted.

FEATURES:
Highlights: 3/8" round high strength steel alloy, Resists permanent bending, 72" long, One piece construction, Two handles for ease of use, Specially formed tips.

The Ground Buster
The Ground Buster  is designed to break through tightly packed, frozen or rocky soils.
Size: Pencil point: 1" dia. x 77" long, Digging Blade: 1" dia. x 72" long

FEATURES: Professional quality, Includes a tamping head for compacting soil or for striking with a maul, Hot forged from high quality 1" round American steel, Bright blue color, easy to see, Manufactured through a combination of drop press or roll forging techniques, Hefty 16 lbs.

Pry Bar Junior
Stop using screwdrivers for prying, use a tool designed for the job.
F EATURES:
Highlights: Overall length is 18", Different ends increase functionality, A long narrow curved end allows access to small holes and provides leverage when lifting lids, A flat wide end allows effective prying Material: 5/8" hex alloy steel, Heat treated for durability, Bright blue color, easy to see

Top of Page